PETpla.net Insider 10 / 2010

TRADE SHOW PREVIEW 66 PET planet insider Vol. 11 No. 10/10 www.petpla.net Moretto S.p.A. Via dell’Artigianato 3 - 35010 Massanzago (PD) ITALY Tel. +39 049 93 96 711 - Fax +39 049 93 96 710 www.moretto.com X MAX, a technological challenge. Flowmatik, a continuous success. OTX, an ingenious intuition. The most ambitious project in the history of the dehumidification. Drying Revolution K 2010 Düsseldorf Hall 11 Stand 11H57 designed by Moretto Energy-saving injection blow moulding machines Jomar Corporation will exhibit two new injection blow moulding (IBM series) machines: the Model 85S Hybrid and the Model 20. The new 85S Hybrid features an electric screw drive rather than a hydraulic drive unit. Incorporated with Jomar’s accumulator system, this is claimed to enable operation with a 30hp motor, down from 75hp. Energy consumption is reduced by 36% compared with the standard Jomar machine with vertical plastifier and by 50% compared with a reciprocating screw machine. It will demonstrate a ten cavity, 4oz round bottle made from clarified PP, at approximately 3,600bph. Jomar is a global manufacturer of injection blow moulding machinery for phar- maceutical, health care, personal care, beauty, food, beverage and household products markets. www.jomarcorp.com Productivity, energy efficiency and flexibility from China Chum Power Machinery Corporation was the first company in Taiwan to build two stage PET stretch blow moulding machines and is certified to ISO-9001 and CE. It exports bottling machinery and complete turnkey projects to 70 countries. Chum Power’s stand will feature the latest generation of its Phoenix series, which is now fully-electric in operation. It will also show its large volume and jar series, which is designed for containers with volumes up to 12l and necks up to 200mm. The company’s L-Series machines feature servo motors and continuous heating for consistency, improved productivity and lower energy consumption. The company’s equipment can produce bottles from 20cc to 20 ; necks from 14 to 200mm and pro- duction levels up to 19,400bph. It serves water, CSD, wine, personal health care, homecare and hot fill markets. www.chumpower.com Jomar Corporation Hall 14 Booth A32 Chum Power Hall 14 Booth B34 From tools to integrated systems KTW (Kunststofftechnik Waidhofen a.d. Thaya GmbH) will be represented on the Wittmann-Battenfeld and Sumitomo-Demag stands at K 2010, in addition to its own. KTW will present an alternative mould cooling system, developed in collabo- ration with Ritemp Technologies. The system transfers heat from mould cavities to ‘water pockets’, which are designed into the contour of the cavities. Water within the cavities evaporates when heated, circulates to a cooled heat exchanger and is then condensed and returned. The Wittmann Battenfeld stand will feature simultaneous production and assembly of a two-part, multi-functional closure for cooking oil bot- tles within an injection mould. A 72-cavity high-performance mould for a PET bottle light closure will be demonstrated on the Sumitomo-Demag stand. www.ktw-group.com KTW Hall 1 Booth A10