PETpla.net Insider 05 / 2017

MARKET SURVEY 29 PETplanet Insider Vol. 18 No. 05/17 www.petpla.net Sumitomo (SHI) Demag Plastics Machinery GmbH Husky Injection Molding Systems Ltd. +49 911 5061 0 www.sumitomo-shi-demag.eu Mr Arnaud Nomblot Director - Business Development Packaging +49 911 5061 625 +49 911 5061 96 625 arnaud.nomblot@dpg.com 500 Queen St S Bolton, ON, CAN L7E 5S5 +1 905 951 5000 www.husky.co Mr Michael White Business Manager, Beverage Closures +1 905 951 5000 ext. 2913 mwhite@husky.ca 500 Queen St S Bolton, ON, CAN L7E 5S5 +1 905 951 5000 www.husky.co Mr Henry Zhang, Director of Business Development, Medical and Specialty Packaging +1 905 951 5000 ext 5196 hzhang@husky.ca El-Exis SP HyCAP4 225t RS50/50 | RS60/60, HyCAP4 300t RS50/50 | RS60/60 | RS70/70, HyCAP4 400t RS60/60 | RS70/70, HyCAP4 500t RS70/70 HyperSync Injection Moulding Injection achieved by a direct drive reciprocating screw Injection achieved by a direct drive reciprocating screw 150 - 750t 225t (2,250kN) | 300t (3,000kN) | 400t (4,000kN) | 500t (5,000kN) 26mm: 2,800 caps/min Varies depending upon application Varies depending upon application 29mm: 2,300 caps/min PCO 1881: 1,650 caps/min Hybrid Clamp stroke achieved by a servo driven ball screw 0.40 - 0.50 Varies depending upon application Varies depending upon application Z-Moulds / Plastisud Husky Husky Mould Identification (ID) ready; Mould Alignment ready large 19" intuitive touch screen HMI for simple operation eIMC servo-driven in-mould closing technology Mould Identification (ID) ready; Mould Alignment ready Sacmi Imola S.C. IMD Ltd Pressco Technology Inc Via Selice Prov.le 17/A 40026 Imola - BO - Italy +39 0542 607111 www.sacmi.com Mr Stefano Severi Vision System Sales Area Manager +39 3356594236 stefano.severi@sacmi.it Moosweg 1, 2555 Brügg - Switzerland +41 32 366 80 66 www.imdvista.ch Mr Martin Gerber Sales Director IMD Ltd. +41 32 366 80 66 +41 32 366 80 69 imd@imdvista.ch 29200 Aurora Road, Cleveland, OH USA +1 440 498 2600 www.pressco.com Mr Tom O'Brien VP, Marketing, Sales & New Bus. Develp. +1 440 498 2600 sales@pressco.com CHS IMDvista Closure Vision Inspection High-speed Vision System Up to 4,000 pcs/min Up to 4,000ppmin/ 240,000pph (depending on customers request and product) up to 3,600 ppm Interior, exterior, sidewall In- or off-line solution, downstream solution by IMDvista - from undermould conveyor (UMC) to cooling conveyor (CCS) in the feeding system (WFS) up to the vision inspection (CLCO) and packaging station (BS), integrated as OEM systems in any kind of machine Plastic caps having diameter up to 43mm One piece closures, assembled closures, doy pack closures, oil closures, sport caps, aluminium (longskirt) closures, rubber parts, coffee cups, coffee filters, shampoo closures, medical closures, lens container, pouches, food container Food, beverage, pharma, specialty, dispensing, sport, plug seal or liner, injection or compression moulded Yes, complete (ovality, colour variations, contaminations, black specs, liner or plug seal…) Short shots, overfill & flashs, contamination, seal defects, colour & colour changes, deforma- tions, diameter & ovality, laser marking inspection Yes Yes, complete (includes decoration inspection) 360° outside view, colour and colour changes, contamination, height measurement Yes Yes, complete (diameters, height) Geometry measurements upon request Yes Yes, it can read any type of character font through a smart learning procedure Easy teach in function, cavity recognition, cavity related statistics, cavity related alarm No Yes, through a spark tester device IMDvista Spark for pinhole detection No Cut and bridges of tamper evident band Upon request Wide range of insert types and materials Sidewall can be inspected by means of a peripheral lens or through Sacmi CVS360-3D inspection module; CVS360-3D consists of a sert of four cameras capable to acquire the 360° of the sidewall, making a compensation of any possible deformation that may stem from perspective, lens and spatial position IMDvista BTIR barrier testing system IMDvista Layer testing system Colour, UV, print/deco, liner/wad, caps on filled containers Yes Flexible In-Line or Off-Line system solution available Yes Yes Yes Correlation defect/cavity number; Through a special software developed by Sacmi R&D, the four images are used to precisely reconstruct the 3D sidewall on a 2D image. Such reconstruction allows to operate on a perfect 2D image carrying out special inspections like TEB band cuts and bridges. IMDvista V5 - newest intelligent software technology. IMDvista Portal, connect all system on one central data base (HMI for fast and transparent production overview) Real-time trend data, last 100 images, defective image database/archive, remote access, biometric user login, customisable reports, OPC connectivity