PETpla.net Insider 08 / 2017

MARKET SURVEY 42 PETplanet Insider Vol. 18 No. 08/17 www.petpla.net Filling inspection systems Company name KHS GmbH Heuft Systemtechnik GmbH Sacmi Fogg Filler Pressco Technology Inc Postal address Telephone number Web site address Contact name Function Direct telephone number E-Mail Juchostraße 20 44143 Dortmund, Germany +49 231 569 0 www.khs.com Am Wind 1, 56659 Burgbrohl Germany +49 2636 56 0 www.heuft.com Via Selice Pro. Le 17/A 40026 Imola Bo, Italy +39 0542 607 111 www.sacmi.com Mr Stefano Severi Area Manager +39 335 6594236 Stefano.Severi@sacmi.it 3455 John F. Donnelly Dr. Holland, MI 49424, USA +1 616 786 3644 www.foggfiller. com Ms Susan Lamar Media Ralations Manager +1 616 786 3644 slamar@foggfiller.com 29200 Aurora Road, Cleveland, OH USA +1 440 498 2600 www.Pressco.com Mr Tom O'Brien Vice President +1 440 498 2600 sales@pressco.com Fill level control Infrared High frequency: Innocheck Fill Height Control HF Yes (over- and underfill + quantifi- ying and statistics per filler valve) No No X-ray Innocheck Fill Height Control X Yes (over- and underfill + quantifi- ying and statistics per filler valve) No No Camera Innocheck Fill Height Control MV Yes (over- and underfill + quantifi- ying and statistics per filler valve) Yes Yes High frequency Yes (over- and underfill + quantifi- ying and statistics per filler valve) Contamination control Innocheck Sniffer (for Ref-PET) detection of foreign objects and dirt in filled containers, detection of foreign objects, dirt and residual liquids in empty containers No Exended shelf life line options. UV Sanitising, chemical rinsing for bottles & caps. Multiple options with optional HEPA air system. No Closure inspection CVS3000 MACHINE Presence of cap Innocheck closure presence detection Yes (with camera or sensor technologie) Yes Yes Crooked cap Innocheck crooked/height fit cap inspection Yes (with camera or sensor technologie) Yes Yes Lifted cap Innocheck crooked/height fit cap inspection Yes (with camera or sensor technologie) Yes Yes Wrong cap Innocheck closure logo inspection or Innocheck closure color inspection Yes (with camera or sensor technologie) Yes Yes Tamper evident band control Innocheck tamper evident seal inspection Yes (with 360 ° all around view) Yes Yes Camera: 360° / sensor Innocheck base module for 360° closure inspection Yes (with up to 9 cameras) Yes, with specific Sacmi tools Yes Label inspection LVS360 / LVS361 machines Torn label Innocheck flagging label inspection (after labeling machine) Yes (with 360° camera inspection) Yes Yes Vertical / horizontal misalign- ment Innocheck label position inspection (for PET: Rollfed labeling: label height fit inspection inside or after labeling machine) Yes (with transmitted light or 360 ° camera inspection) Yes Yes Best-before date control Innocheck code inspection Yes (presence check with sensor, or verification with camera) Yes No Camera: 360°/ sensor Innocheck label position inspection (inside labeling machine) Yes (sensors for label presence check or multiple cameras for 360° label verification in several levels) Yes, capible to inspect round and non-round bottles Yes Pressure leak detector Innocheck leakage detection by squeezer Yes (active or passive pressure/ leakage check) Yes, application angle inspec- tion through pull up marks No Applicable bottle type Glass, PET, Aluminium, Steel Diameter All standard PET bottle formats of bever- age industrie All usual diameters 190mm 8" Up to 150mm Height All standard PET bottle formats of bever- age industrie All usual heights 340mm 18" Up to 400mm Rejecting bottle Either by Innocheck pusher into bin or by Innocheck GRS guided rejection system onto collecting table Yes (various rejection systems for different rejection tasks) With single or multipush device Push reject & Diverter Reject options available Inspection speed Up to 72.000bph / 86.000bph (depends on inspection system and rejection system) Up to 100 000 containers / h, 2000 mm/s Up to 60,000bph Over 3,000ppm Monitoring Innocheck MMS Machine Management System for Filler and Seamer is standard. Extension for further rotary machines blocked with the filler, possible. Yes (self explaining device interface, which gives all needed information about the inspection, additionally counters, messanges and statistics can be transfered to data aquisition systems) Statistical data saved in SQL database, shareable through lan connection; Correlation of defect by tool number, plate number and filling valve number Filler Valve, Capper Head correlation 08/2017 MARKET survey