PETpla.net Insider 05 / 2018

TRADE SHOW PREVIEW PET planet Insider Vol. 19 No. 05/18 www.petpla.net 55 TRADE SHOW PREVIEW 55 Preferential & offset neck heating This technology kit produces opposing longitudinal heating bands to the preform to optimise production of oval or oblong bot- tles.This technology goes one step further by also allowing for these heated bands to be moved off- axis from the preform centerline; so that offset neck bottles can be produced. Neck orientation This technology kit puts all the neck nishes on each and every bottle to be in the same orienta- tion. This is invaluable for con- tainers that use a ip-top cap so that it aligns in the proper position for opening and pouring. 1Blow can do this alignment without the need of a tab or V-notch on the preform. The 1Blow servo-driven mechanical system relies only on the thread start, and thus can use standard preforms; opening up the spectrum of preforms that can be used. Heat set This set combines heated blow moulds with recirculating high pressure air cooling to induce higher crystallinity into the bot- tles. This higher crystallinity allows the resultant bottles to have heat resistance to the hot ll process. • 28mm, 33mm and 38mm screw closures • Robust and trouble free capping • Established DoubleSeal™ technology - for secure sealing performance - for better protection against micro-organisms • Slit FLEXBAND ® band technology for enhanced tamper evidence • O 2 barrier and scavenging options for screw flat caps supporting longer shelf life and fresher taste • Sports closures for aseptic filling and hot filling without aluminum foil • Special closures for syrups and carton packaging Unique range of screw and sports closures designed for cold fill and aseptic application BERI CAP Technology for juices, RTD teas, health drinks www.bericap.com Base inversion This technology kit is a multi- staged mould base system that allows for the base push-up of the blow mould to be moved up in two or more increments and allows for the creation of a diaphragm base. On heat set bottles this acts to absorb the vacuum created after the liquid contents cool in hot ll bottles. Sure grip This technology kit allows for the production of bottles with a hyper-extended grip into the bottle that could not be produced in standard stretch-blow moulding processes. It utilises software and hardware on the machine com- bined with a multi-staged mould insert system that allows for both opposing handle grip contours to be moved inward during the stretch-blow moulding process. 1Blow invites the visitors to its booth to experience the 4LO rst hand and to see and learn of all of its features, benets, and advan- tages, and why it also just might be the greenest stretch-blow moulding machine on the market today. www.1blow.com