PETpla.net Insider 12 / 2019

MARKET SURVEY 29 PETplanet Insider Vol. 20 No. 12/19 www.petpla.net Erema Engineering Recycling Maschinen und Anlagen Ges.m.b.H. Gneuss Kunststofftechnik GmbH Tecnofer Ecoimpianti SRL Amut SPA Unterfeldstraße 3, 4052 Ansfelden, Austria +43 732 3190 0 www.erema.at Mr Christoph Wöss Business Development Manager, Application Bottle +43 732 3190 352 c.woess@erema-group.com Mönichhusen 42, 32549 Bad Oeynhausen, Germany +49 5731 5307 0 www.gneuss.com Via Calto 409 45030 Ceneselli (Ro), Italy +39 0425 849090 www.tecnofer.biz Mr Mauro Garbellini Sales manager +39 0425 849090 sales.dep1@tecnofer.biz Via Cameri 16, 28100 Novara, Italy +39 0321 6641 www.amutgroup.com Mr Piergianni Milani President +39 0321 664941 p.milani@amut.it Yes, washing done in cooperation with long-time partners Engineering of washing lines with long term partners Yes Yes No Up to 17,000 3,000-45,000 In function of size and stream quality FDA, ESFA, INTI, brand owners (conf.) Depending on bottle contamination Depends on stream quality Depending on input material 300-600 Vacunite- and Vacurema-Technology. Specification of input flakes: higher contamination can influence pellet quality but are basically possible to process, after discussion and agreed by Erema Yes FDA, EFSA (positive opinion issued), ANVISA, ilsi, BGBI, brand owners FDA, ESFA (pending), brand owners (conf.) No Up to 32,000 200-17,000 3,000-45,000 Depending on through-put and technology: 50-600 30-80, depending on size In function of size and stream quality FDA [cat. A-H&J]; EFSA (pending); brand owners (conf.); several national approvals (Austria, CH, Zona Mercursur, etc.) FDA, ESFA (pending), INTI, brand owners (conf.) Depending on application & technology type, there is a closed loop system no fresh water needed 1 Between 250-350 < 350 100-400 Specification of input flakes for MPR: Higher contamination can influence flake quality but are basically possible to process, after discussion and agreed by Erema Yes FDA [cat. A-H&J]; EFSA (pending); with Multi Purpose Reactor (MPR) Yes Up to 20,000 Amin. output capacity of 1,000 kg/h up to 4,000 kg/h 3,600-45,000 Between 20-60 Min. floor space from 700-800m² onwards, depending on layout type and hourly capacity. In function of size and stream quality FDA, EFSA (positive opinion issued) Respect the food grade parameters of the equipment dedicated to their use for food contact applications. Closed loop system Approx. 2,5-3 l/kg (2,5-3 m³/t), but it depends on layout type and production capacity 1 100 Between 0,58 - 0,62 kWh/kg (580 - 620 kWh/t), but it depends on layout type and production capacity 250-300 Detergent of different suppliers; quantity in function of the detergent Non disclose < 50ppm To be defined in function of the contamination of the material Non disclose Yes, Vacurema Inline preform (Xtreme Renew) Yes, mainly thermoforming sheet lines in direct food contact Each washing line is customised as per customer’s final applications, so our lines can be applied and customised to each of the listed applications. Yes Yes, Vacurema Inline sheet Yes, several lines under operation worldwide Yes Yes, Vacurema Inline fibre; Yes, Vacurema Inline strapping Yes, several lines under operation worldwide Yes