Difference between revisions of "Vacurema technology"
From WikiPETia.info
| Line 9: | Line 9: | ||
'''* Flexibility with input material''' | '''* Flexibility with input material''' | ||
| − | Depending on the end application the system processes PET bottle flakes, ground amorphous skeleton waste/edge trim and virgin material (also in mixtures), i.e. bulk densities of 250 to | + | Depending on the end application the system processes PET bottle flakes, ground amorphous skeleton waste/edge trim and virgin material (also in mixtures), i.e. bulk densities of 250 to 850kg/m³. |
'''* Food contact compliant decontamination''' | '''* Food contact compliant decontamination''' | ||
| Line 17: | Line 17: | ||
Surface to volume ratio for flakes is 2.5 times higher than for pellets | Surface to volume ratio for flakes is 2.5 times higher than for pellets | ||
| − | Bottle flakes | + | '''Bottle flakes''' |
| − | Pre-ground with 12 mm screen, average wall thickness approx. 0.1 to 0. | + | |
| − | Pellets | + | Pre-ground with 12 mm screen, average wall thickness approx. 0.1 to 0.4mm |
| − | Typical dimensions: diameter approx. | + | |
| − | 2. | + | '''Pellets''' |
| + | |||
| + | Typical dimensions: diameter approx. 2.5mm x 3mm length or ball shap | ||
'''* IV stability through vacuum treatment''' | '''* IV stability through vacuum treatment''' | ||
| Line 29: | Line 31: | ||
'''* Melting under vacuum''' | '''* Melting under vacuum''' | ||
| − | The patented pre-treatment at raised temperature and in high | + | The patented pre-treatment at raised temperature and in high vacuum before the extrusion process removes moisture and migration materials from the feedstock in a stable process environment. This prevents any hydrolytic and oxidative decomposition of the melt in the extruder. |
| − | vacuum before the extrusion process removes moisture and | ||
| − | migration materials from the feedstock | ||
| − | a stable process environment. This prevents any hydrolytic and | ||
| − | oxidative decomposition of the melt in the extruder. | ||
'''* Low thermal stress''' | '''* Low thermal stress''' | ||
| − | The very short extruder screw without additional extruder | + | The very short extruder screw without additional extruder degassing reduces the thermal stress on the material through minimized dwell time. |
| − | degassing reduces the thermal stress on the material through | ||
| − | |||
'''* Large area ultrafine melt filtration''' | '''* Large area ultrafine melt filtration''' | ||
| − | + | The filter systems have very large active filter surfaces. This enables filtration with up to 32μm fineness at low pressure. The result is highly clean pellets. | |
| − | enables filtration with up to | ||
| − | The result is highly clean pellets. | ||
'''* Compact design''' | '''* Compact design''' | ||
| − | |||
| − | |||
'''* Minimum production costs with ecoSAVE''' | '''* Minimum production costs with ecoSAVE''' | ||
| − | Electricity accounts for 38% of the costs of bottle-to-bottle recycling. Thanks to integrated ecoSAVE technology, the lowest production | + | Electricity accounts for 38% of the costs of bottle-to-bottle recycling. Thanks to integrated ecoSAVE technology, the lowest production costs of all systems on the market. |
| − | costs of all systems on the market. | ||
'''* Smart Start principle''' | '''* Smart Start principle''' | ||
| Line 67: | Line 58: | ||
'''Bottle-to-Bottle''' | '''Bottle-to-Bottle''' | ||
| − | + | ||
| + | Vacurema Prime PET extrusion system features two crystallisation dryers operating in batch mode. act quickly to current market requirements: whether it‘s decontaminated, pre-dried and crystallised rPET flakes or high-quality, melt-filtered rPET pellets – products produced using Vacurema Prime technology fulfil the respective criteria of the FDA, EFSA and many major brand owners. | ||
| + | |||
| + | If IV values of > 0.9 dl/g or very high throughputs (> 2500 kg/h) are required, the company can offer its Vacurema technology also in combination with an SSP solution from Polymetrix. | ||
Revision as of 09:24, 28 January 2016
Vacurema
Erema's Vacurema systems offer modular solutions for different solutions for recycling of PET bottles. The patented process is designed for the recycling of post consumer PET bottle flakes, PET in-house waste and also PE-HD bottle flakes.
Erema claims that there are currently more than 150 Vacurema systems in use around the world, producing high-quality pellets and end products with an overall capacity of over 1 million tonnes.
Basic principles
* Flexibility with input material
Depending on the end application the system processes PET bottle flakes, ground amorphous skeleton waste/edge trim and virgin material (also in mixtures), i.e. bulk densities of 250 to 850kg/m³.
* Food contact compliant decontamination
Thanks to the patented pre-treatment of PET flakes, IV increase and decontamination are fast, reliable and energy-saving. This means that FDA quality (among other things) can be ensured for the end products produced. Surface to volume ratio for flakes is 2.5 times higher than for pellets
Bottle flakes
Pre-ground with 12 mm screen, average wall thickness approx. 0.1 to 0.4mm
Pellets
Typical dimensions: diameter approx. 2.5mm x 3mm length or ball shap
* IV stability through vacuum treatment
Despite varying moisture levels and different IV values in the input material, stable IV values are achieved through the patented pre-treatment method. This means, therefore, that input materials with higher material moisture levels can also be recycled.
* Melting under vacuum
The patented pre-treatment at raised temperature and in high vacuum before the extrusion process removes moisture and migration materials from the feedstock in a stable process environment. This prevents any hydrolytic and oxidative decomposition of the melt in the extruder.
* Low thermal stress
The very short extruder screw without additional extruder degassing reduces the thermal stress on the material through minimized dwell time.
* Large area ultrafine melt filtration
The filter systems have very large active filter surfaces. This enables filtration with up to 32μm fineness at low pressure. The result is highly clean pellets.
* Compact design
* Minimum production costs with ecoSAVE
Electricity accounts for 38% of the costs of bottle-to-bottle recycling. Thanks to integrated ecoSAVE technology, the lowest production costs of all systems on the market.
* Smart Start principle
The plant‘s software-based process control system gives you extremely easy and reliable operation and premium user-friendliness including automatic start-up at the press of a button, fully automatic continuous operation, permanent monitoring for direct food contact (FCC) and the storage of all relevant process parameters.
* Turnkey solutions
Erema delivers turnkey systems with support from one contact for the entire recycling process: sorting – washing – decontamination – extrusion – quality control – end product.
Three application fields
Bottle-to-Bottle
Vacurema Prime PET extrusion system features two crystallisation dryers operating in batch mode. act quickly to current market requirements: whether it‘s decontaminated, pre-dried and crystallised rPET flakes or high-quality, melt-filtered rPET pellets – products produced using Vacurema Prime technology fulfil the respective criteria of the FDA, EFSA and many major brand owners.
If IV values of > 0.9 dl/g or very high throughputs (> 2500 kg/h) are required, the company can offer its Vacurema technology also in combination with an SSP solution from Polymetrix.
